DK series
This polyamide/polypropylene level switch, supplied with nut, is fixed from the inside of the tank. With a small footprint, only 47 mm long, it is perfectly suited for applications in water up to 80°C.
The position of the float on the body allows the contact to be reversed (to be determined when ordering).
It can be reversed for installation at the bottom of the tank. The mounting orientation then determines the detection (high or low level).
SPECIFICATIONS
| General features | DKFBTF4600 | DKRBTF4620 |
|---|---|---|
| Body material | Polyamide | Polyamide |
| Float material | Polypropylene | Polypropylene |
| Nut material | Nylon | Nylon |
| Cable material | PVC | PVC |
| Cable cross section | 0.34 mm² - 570 mm | 0.34 mm² - 570 mm |
| Operating temperature (in water) | 0 to 80°C | 0 to 80°C |
| Contact closed | Nut side | Stop side |
| Applications | Multi-purpose | Multi-purpose |
| Electrical features of the contact | |
|---|---|
| Electrical power max. | 10 W |
| Electrical voltage (AC) max. | 140 V |
| Electrical voltage (DC) max. | 200 V |
| Current max. | 0.5 A |
| Installation instructions |
|---|
| Mounting from inside the tank |
| Drilling diameter: Ø8.5 mm |
| Wall thickness: to 4 mm |
| Fastening: Seal and nut M8 |
| Tightening torque: 0.6 Nm |
A tailor-made request?
Our design office and our sales department are able to offer you an optimal
solution in answer to your specifications:
material, wire, cable, connector, specific accessory…
Contact us to discuss your project together.