DB series - Suction cane with level
detector
The DB sensor is a suction cane with a cap. It is screwed on a container, in place of the existing cap, and will allow, thanks to its sensor, to determine a liquid level (high, intermediate, low).
The dry contact will then allow you to relay this level.
A double connection to a pump is provided, allowing the suction and/or return in the container.
SPECIFICATIONS
| General features | |
|---|---|
| Float material | Polypropylene |
| Tube material | PVC |
| Cap material | Noryl |
| Cable material | PVC |
| Cable cross section | 0.34 mm² - 500 mm |
| Operating temperature (in water) | 5 to 80°C |
| Applications | Multi-purpose |
| Electrical features of the contact | |
|---|---|
| Electrical power max. | 30 W |
| Electrical voltage (AC) max. | 250 V |
| Electrical voltage (DC) max. | 200 V |
| Current max. | 1 A |
| Installation instructions |
|---|
| Screw fixing on the container (non-waterproof) |
| Suction tube Ø6 to 10mm inside |
| Check the chemical compatibility with your liquid |
A solution adapted to your container
Customization of the following elements:
Cap
We offer plugs of different diameters, screw threads, depths….
Tubes
All tube lengths are available. This will allow, whatever the depth of the container, to detect the liquid threshold as low as possible.
Whatever its shape and capacity!
(Neck Ø32mm minimum inside diameter)
