Sensors

SICCOM detection systems are mainly based on the use of the reed switch.
The reed switches consist of two ferromagnetic blades of iron and nickel, sealed in a glass capsule. These blades open or close by introducing a magnetic field in the vicinity of the bulb (magnet or powered coils).

DY series

DY seriesThis level sensor, with a space requirement outside the tank of 38 mm long and 32.5 mm wide, is [...]

DX series

DX seriesThis level sensor, with an overall length of 58 mm, for a maximum float diameter of 28 mm, is [...]

DP series

DP seriesThis polypropylene level switch, supplied with nut and sealing washer, is fixed from the inside of the tank. With [...]

DK series

DK seriesThis polyamide/polypropylene level switch, supplied with nut, is fixed from the inside of the tank. With a small footprint, [...]

DG series

DG seriesThis polypropylene level switch supplied with nut and sealing washer is fixed from the inside of the tank. With [...]

DD series

DD seriesThe DD probe, also known as the Divar probe, is a multi-threshold level detector (1, 2 or 3 thresholds) [...]

DC series

DC seriesThe multi-level resistive rod allows the continuous reading of a liquid level in a tank. This tank gauge has [...]

DB series

DB series - Suction cane with level detectorThe DB sensor is a suction cane with a cap. It is screwed [...]

DHX series

DHX seriesThis stainless steel level switch is mounted from the outside of the tank using a 1/2 NPT thread. It [...]

DHN series

DHN seriesThis polyamide or polypropylene level switch is mounted from the outside of the tank using a 1/2 NPT thread. [...]

DHM series

DHM seriesThis polyamide level switch is mounted from inside the tank. It is supplied with its accessories for a secure [...]

DHG series

DHG seriesThis level switch is available in polyamide or polypropylene and can be mounted from outside the tank or tank. [...]

PR series

PR seriesThey are used to monitor a movement and activate safety functions by controlling the opening / closing of doors, [...]

OEM sensors

OEM sensorsFor more than 25 years SICCOM has been designing level detection systems for leading manufacturers of medical, food, oil/gas, [...]